Cannabidiol (CBD), one of the three main chemicals found in the trichomes of the cannabis plant, has gained plenty of attention lately as more studies show many different possible applications for it. You can find CBD in nearly every type of cannabis plant including cannabis plants containing THC, the psychoactive chemical that makes you feel ‘high. Varieties of the cannabis plant especially bred to be high-CBD/ low-THC. Industrial hemp plants which contain no THC and have no psychoactive effect. There are a lot of ways of extracting CBD from any of these varieties of cannabis. If the plant you start with contains only CBD, there are many extraction methods which are extremely simple and require little equipment. The most common methods use some type of solvent. This can be a liquid solvent, CO2, or an oil solvent. If the plant material you begin with contains THC in addition to CBD, the process to separate CBD from other cannabinoids is more complex and generally requires professional gear. To avoid getting too technical, let us look mostly at extraction methods for CBD-only plants. Make a search on the following site, if you’re looking for more information on vogel kristal kopen.
Carbon Dioxide is a unique molecule that can be the state of matter solid, liquid or gas depending on the pressure and temperature it is kept under. Because variables like pressure and temperature have to be kept quite specific in a C02 extraction, this extraction method is usually done with a piece of equipment called a closed-loop extractor. This machine has three chambers: the first chamber holds solid, pressurised C02, the second chamber contains dry plant material and the third room separates the finished product. When performing the extraction, the good C02 from the first chamber is pumped to the second with the plant material. This second chamber is kept at a particular pressure and temperature which causes the C02 to behave more like a liquid so that it runs through the plant material and extracts chemicals and flavours, much like in the liquid solvent process. Then, the C02-cannabinoid mix is pumped into a third chamber where it is kept at a much lower pressure and higher temperature so that the C02 gas rises to the peak of the chamber while the oils containing chemicals and tastes from the plant material fall to the bottom to be collected for consumption.
There are many benefits of this method. It doesn’t need a lengthy evaporation process like a liquid solvent extraction and there’s minimal danger of contaminants in the finished product. Because this method carefully controls temperature and pressure, it can also be used to separate CBD from cannabis also containing THC. CBD extracts from the plant at a lower temperature and pressure than THC, so careful adjustment of the pressure and temperature at the second room can isolate the particular cannabinoid you want to extract. Closed-loop extractor systems are very pricey, however, and that’s why this sort of extraction is generally only used by professional CBD producers. The medical world has realized that there are lots of health benefits of CBD oil. Research shows that CBD benefits include acting as an anti-inflammatory, anticonvulsant, antioxidant, antiemetic, anxiolytic and antipsychotic agent, and is, thus, a possible medicine for the treatment of neuroinflammation, epilepsy, oxidative injury, vomiting and nausea, anxiety and schizophrenia.